150W AC/DC switch power supply

150W AC/DC switch power supply CE, Rohs approved UL approved also for higher cost

Detailed Product Description

150W AC/DC switch power supply

size: 199*98*38mm or 159*98*38mm

ModelSpecification	S-150-5	S-150-7.5	S-150-9	S-150-12	S-150-13.5	S-150-15	S-150-24	S-150-27	S-150-48
DC output voltage	5V	7.5V	9V	12V	13.5V	15V	24V	27V	48V
Output voltage error(Note2)	±2%	±1%	±1%	±1%	±1%	±1%	±1%	±1%	±1%
Rated output current	30A	20A	16.7A	12.5A	11.2A	10A	6.5A	5.6A	3.2A
Output current rage	0-30A	0-20A	0-16.7A	0-12.5A	0-11.2A	0-10A	0-6.5A	0-5.6A	0-3.2A
Wave and noise(Note 3)	150mVp-p	150mVp-p	150mVp-p	180mVp-p	180mVp-p	180mVp-p	240mVp-p	240mVp-p	240mVp-p
Inlet stability(Note 4)	±0.5%	±0.5%	±0.3%	±0.3%	±0.3%	±0.3%	±0.2%	±0.2%	±0.2%
Load stablity (Note 5)	±0.5%	±0.5%	±0.3%	±0.3%	±0.3%	±0.3%	±0.2%	±0.2%	±0.2%
DC output power	150W	150W	105.3W	150W	151.2W	150W	156W	151.2W	153.6W
Efficiency	70%	80%	80%	82%	83%	84%	85%	86%	87%
Adjustable range for DC voltage	4.5~5.5V	7~8.3V	8~10V	10.6~13.2V	12~15V	13.5~16.5V	21~28V	24~30V	43~53V
AC input voltage range	86-132VAC/170-264VACSelected by switch47-63Hz;240-370VDC
Input current	3.2A/115V 1.6A/230A
AC INnrush current	Cold-start current30A/115V 60A/230V
Leakage current	<3.5mA/240VAC
Overload proctection	105%-150%Type:Foldback:current limiting reset:auto recovery
Over-voltage protection	115%-135
High-temperature protection
Temperature coefficient	±0.03%/°C(0-50°C)
Setup rise hold up time	100ms,50ms,20ms
Vibration	10-500Hz,2G 10min,/1cycle,Period for60min,Each axes
Withstand voltage	Input and output internal;1.5KVAC,Input and enclosure;1.5KVAC,Output and enclosure;0.5KVAC
Isolation resistance	Input and output internal:Input and enclosure,Output and enclosure;500VDC/100MΩ
Working temperature and humidity	-10°C~+60°C(Refer to output derating curve),20%~90%RH
Store temperature and humidity	-20°C~+85°C.10%~95%RH
Overall dimension	199×110×50mm
Weight	0.8Kgs
Safety standards	UL1950 TUV EN60950)Verification
EMC standards	CISPR22(EN55022),IEC10000-4-2,3,4,5 IEC1000-3-2Verification
Note1.The testing condition for the paramenter above;230VAC input,rated load,25°C70% RH.Humidity.2.Error.include the setting error,line stability and load stability.(Note:5).3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting.4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.5.Load stability test:the load is from 0% to 100%. 6.C2,3,11must be knocked down.

150W AC/DC switch power supply